Agricultural Lighting Solutions for Livestock Sheds and Poultry Houses

Agricultural lighting is sealed LED lighting built for livestock buildings, where luminaires face ammonia, feed dust and high-pressure washdown. OLAMLED supplies IP68 and IP69K LED tubular tri-proof luminaires for cattle sheds, pig houses, sheep sheds and poultry houses.

Why standard luminaires fail in farm buildings

Standard luminaires fail early in farm buildings. Ammonia, hot-water washdown and feed dust drive up replacement costs and downtime.
Ambienti corrosivi e ad alta umidità

Corrosive, high-humidity environments

Gases from animal waste attack standard luminaires. The result is more failures, higher replacement costs and longer downtime in cattle sheds, pig houses and poultry houses.

Pulizia ad alta pressione

Lavaggio ad alta pressione

Farm buildings are cleaned with high-pressure water jets. Standard luminaires are not sealed for washdown, so water enters the housing and the fitting fails.

A prova di polvere e intrusione di detriti

Dust and debris ingress

Feed dust and debris enter standard light fittings. Ingress reduces light output and shortens service life in sheds and feed stores.

Our agricultural lighting solutions: IP68 and IP69K luminaires

Choose IP68 and IP69K luminaires for farm buildings. They withstand high-pressure cleaning and resist ammonia from animal waste. These anti-ammonia, waterproof fittings cover most agricultural lighting needs, except growth and incubation lamps.

Protezione impermeabile IP69K

Protezione impermeabile IP69K

Engineered to the highest waterproof standard, our luminaires block out dust completely and withstand high-pressure washdowns, delivering reliable, long-lasting performance in the harshest farm conditions.

Withstands hot water washdowns up to 80°C

Farm buildings demand regular high-temperature cleaning and disinfection. Our luminaires withstand hot water washdowns up to 80°C without damage, so hygiene routines never compromise the lighting.
Tubo luminoso a LED resistente alle alte temperature.
Luci a tubo LED ad alta resistenza.

Corrosion-resistant design against ammonia

Animal waste releases corrosive gases such as ammonia, which quickly degrade standard luminaires. Our fittings use anti-corrosive materials and coatings that resist gas exposure and extend service life in active farm buildings.

Prestazioni di tenuta superiori

Our luminaires use advanced multi-layer sealing to keep internal electronics completely dry and clean, even in high-humidity, dust-filled farm buildings. The result is consistent, reliable performance whatever the conditions.
Prestazioni di tenuta superiori

Agricultural lighting videos

Luce tubolare a LED satinata e trasparente
Luce tubolare a LED da 45 mm
Luce tubolare a LED Ø70mm | OLAMLED
IP68 IP69K Diametro 80MM | OLAMLED

Where our agricultural lighting is used

Our agricultural lighting is built for every type of farm building, so each space gets the light it needs.
File di mucche Holstein pascolano in una moderna e spaziosa stalla da latte.

Cattle sheds and dairy parlours

Cattle sheds and dairy parlours are hard on luminaires: high humidity and ammonia degrade them quickly. Our IP69K fittings withstand harsh cleaning, resist corrosion and keep their output year after year.
Un gregge di pecore si raduna all'interno di una stalla spaziosa e ben illuminata, al riparo dalle intemperie.

Sheep sheds

Built for sheep sheds. Our IP69K luminaires block out dust and feed, giving the flock bright, even light for healthy growth.
Allevamenti di maiali

Pig houses

Pig houses demand robust luminaires. Ours withstand 80°C hot water washdowns and resist corrosion in high-ammonia air, for reliable lighting day after day.

Which luminaire for which farm building?

Match the building to the luminaire, then specify the build options. Every series below is an IP68 / IP69K LED tubular tri-proof luminaire, so all of them withstand ammonia and high-pressure washdown.

FattoriaSfida principaleCampionatiOptions to specify
Cattle shed & dairy parlourHigh humidity and ammoniaK80/K70316L end caps, suspended, linkable
Pig houseHot water washdown up to 80°C, high ammoniaK80/K70316L end caps, PC or PMMA housing
PollaioFeed dust, washdown, lighting controlK70/K45Dimmable driver, linkable, surface-mounted
Capannone per pecoreDust and feed ingressK70/K45Surface-mounted or suspended
Feed store & general farm buildingPolvere e umiditàK45Non-dimmable driver, linkable

The K series LED tubular tri-proof luminaire

LED tubular tri-proof luminaires — K80, K70 and K45 series — are used extensively in farm buildings

The K series is waterproof, dustproof, anti-corrosion and anti-ammonia by design. Each luminaire can be specified on five axes:

  • Montaggio: surface-mounted or suspended
  • Collegamento: linkable or non-linkable
  • Tappi terminali: Acciaio inossidabile 304L o 316L
  • Corpo: PC or PMMA
  • Autista: dimmable or non-dimmable
Soluzioni di illuminazione per aziende agricole
Soluzioni di illuminazione a LED per le aziende agricole

Parametri del prodotto

Parametri tecnici-Diametro: Ø70mm/Ø80mm
Potenza20W30W40W60W
Flusso luminoso 2600-3200lm/Trasparente 3900-4600lm/Trasparente5200-6000lm/Trasparente7600-9000lm/Trasparente
2200-2800lm/Opale3300-4000LM/Opale4400-5300lm/Opale6600-7800lm/Opale
DimensioniL665×¢80mmL965×¢80mmL1265×¢80mmL1565×¢80mm
Tensione di ingressoAC220-240V/AC100-277V(per il mercato statunitense)
Fattore di potenza (PF) > 0.95
Efficienza luminosa130LM/W (Opale)
150 lm/W (chiaro)
Sorgente LEDEdison SMD 2835, CRI>80Ra
Colore del corpo della lampadaTrasparente/opale
Colore del cappuccio terminale in metalloAcciaio inossidabile 304L/316L
Indice di protezioneIP68/IP69K
Angolo del fascio luminoso120°
Materiale custodiaPMMA/PMMA
Temperatura di lavoro-20 ° C ~ + 50 ° C
Per sempre.L90B10, >50000 ore
tempo della garanzia  5 anni
Certificazione CE, RoHS

Agricultural lighting FAQ

What ingress protection rating do OLAMLED farm luminaires have?

They are rated IP68 and IP69K. That is why they can be installed in cattle sheds, pig houses, sheep sheds and poultry houses where high-pressure cleaning is routine.

Can the luminaires be cleaned with hot water?

Yes. They withstand hot water washdowns up to 80°C and high-pressure washdowns at 80–100 bar, so hygiene and disinfection routines do not damage the fitting.

What are the end caps and housing made of?

End caps are 304L or 316L stainless steel, and the housing is PC or PMMA. Stainless steel fasteners give long-term rust protection in ammonia-rich air.

Are the luminaires dimmable?

Both dimmable and non-dimmable drivers are available. The driver is specified per project, alongside mounting and connection method.

Can the luminaires be linked in continuous rows?

Yes. Connection modes are linkable and non-linkable, and both surface mounting and suspension are supported.

What warranty and certification do they carry?

The warranty time is 5 years, and the luminaires are certified to CE and RoHS. Rated lifetime is L90B10, over 50,000 hours.

Qual è la quantità minima d'ordine?

Low MOQ from 1 pc for standard products. OLAMLED also develops moulds, packaging design and certification for OEM and ODM projects.

Do you supply grow lights or incubation lamps?

No. These anti-ammonia, waterproof luminaires meet most farm lighting needs, except for growth and incubation lamps.

OEM and ODM for lighting distributors and system integrators

Personalizza per te

Fabbrica certificata ISO9001:2000

Quantità minima minima a partire da 1 pezzi

Sviluppa stampi per te

Progettazione del packaging per te

Certificazione per te

Processo di prodotti LED personalizzati di alta qualità

Scopri come lavoreremo insieme

Scopri

Il nostro team apprende di più sulle tue specifiche esigenze attraverso un approfondito processo di consulenza e di analisi.

Define

Sulla base delle informazioni dettagliate ottenute durante il processo di consultazione, abbiamo determinato la struttura, i parametri, gli scenari applicativi e altri requisiti correlati del progetto.

Soluzione

Abbiamo preparato un preventivo per questo progetto, che include i materiali richiesti e il lavoro di personalizzazione specifico che intraprenderemo.

Contratto

Successivamente vi invieremo una copia del contratto per approvazione, a dimostrazione del nostro reciproco accordo in merito al progetto.

Prototipo

Verrà creato un campione funzionale per i test, ricalibrando il campione per apportare miglioramenti e ottimizzazioni.

Review

Ti inviamo un campione del progetto e discutiamo di come si adatta alle tue specifiche. Qualsiasi richiesta di revisione viene presa in carico e implementata finché non sei soddisfatto dei risultati.

Produzione e ispezione meticolosa delle luci LED

Mostriamo qui il nostro team di produzione, il magazzino, le apparecchiature di prova e altri aspetti per garantire che il tuo ordine venga evaso

Macchina da taglio laser

Macchina da taglio laser

Macchina piegatrice a LED

Macchina piegatrice a LED

Officina SMT

Officina SMT

Macchina laser

Macchina laser

Olam Potente catena di fornitura

Magazzino materie prime

Goniofotometro

Goniofotometro

Prova fotoelettrica

Prova fotoelettrica

Test di invecchiamento

Test di invecchiamento

Test della sfera integrata

Test della sfera integrata

Our major partners

TRIDONICO
PHILIPS
LUMILLE
EPISTAR
Edison
riservatezza

Mantenere riservati i dettagli proprietari

OLAMLED fornisce soluzioni di illuminazione LED personalizzate per dare alla tua attività un vero vantaggio competitivo.

Proteggiamo le tue idee e i tuoi progetti. Le tue informazioni riservate sono al sicuro con noi.

Se hai bisogno di ulteriori garanzie, saremo lieti di firmare un accordo di non divulgazione.

Contattaci oggi, ti risponderemo immediatamente

Le tue informazioni saranno mantenute strettamente confidenziali.

Vi contatteremo entro 1 giorno lavorativo; vi preghiamo di prestare attenzione all'email con suffisso @olamled.com.

Vicky

Ciao a tutti, sono Vicky Zhang, CSO di OLAMLED, io e il mio team saremmo felici di incontrarti e imparare tutto sulla tua attività, requisiti e aspettative.